MOPAR DODGE 440 ENGINE HI PERF SHORT BLOCK ASSEMBLY HP HYD CAM street/strip

Description

Now for your hot rodding pleasure we have mopar 440 FORGED CRANK short block engine builds for your mopar musclecar, truck or street rod.  COMPLETE- CAM TO PAN!  These are built on quality 440 castings that have been cleaned, inspected, pressure tested.   All blocks are checked for any damage, and then bored with appropriate torque plate,  Crank saddle checked and line bored if necessary. Then after thorough washing block is painted customer requested color (Correct Chrysler blue shown here), new cam bearings installed, new freeze plugs and screw in pipe plugs installed, New distributor bushing
*Block is assembled with all new Clevite or King bearings and forged crank goes in for initial fitting
*After trial fit passes , crank is installed with new Fel pro rear main seal & ARP main bolts
*All fresh 440 SOURCE rods with ARP bolts and ICON FORGED/ KB pistons with flat top pistons and advertised pump friendly 10.4 comp w/ press fit pins (speed pro forged shown and optional as well as 440 source forged- inquire) Spirolox clips used when applicable pistons/rods chosen - we use the higher comp pistons with alum heads to offset the BTU loss of aluminum- PISTONS FOR THIS CAM APPLICATION WILL HAVE VALVE RELIEFS- see last photo!
*Each rod and piston is trial fitted to ensure perfect fit
*New Hastings OR Total Seal Moly ring set- top ring fitted appropriately for KB piston with extended gap for piston crown expansion
*all new Clevite or King bearings for connecting rods and mains
*new windage tray and hardware- not shown
*all new HV63 Melling pump and new 3/8 pick up appropriately picked for matching pan
*HD intermediate oil pump/ distributor shaft
*all new oil pan and Fel Pro gasket /seal set-
6 qt 440 source PASSENGER CAR pan- 7 qt standard and low profile pans available optionally- TRUCK AVAILABLE
*Comp HYDRAULIC
COMP Cams Xtreme Energy Camshafts
Advertised Duration 284//296, Lift .511
- choppy idle but enough vacuum for power brakes(other cams available)  a wicked fast street cam with 3.55 gears and up!
*ALSO AVAILABLE-  HUGHES CAM AND LIFTERS WITH SIMILAR SPECS
*Cloyes tru roller timing set and new cam bolt and washer
*chrome fuel pump block off
*new chrome timing cover
*new HP SFI balancer for internal balance FORGED crank (external balance shown i)- NOT  A USED BALANCER UNLESS YOU WANT OEM STOCK
*all new grade 8 hardware
*solid flat tappet cam 199
*roller hydraulic or solid cam setup 995 which will also include rigid timing cover-
Comp or Hughes
*Speed pro, ICON, KB or 440 source forged pistons
MANY OPTIONS AVAILABLE
and more....these are just some examples - contact for options
12mo 12k warranty on parts and materials under normal circumstances
This is a stock photo and engine will be built to your specs
All complete engines are pre run on our Top of the line PRW engine module
Turnaround time is about 6 -8 weeks, depending on how busy we are, and we don't have a core charge.   All orders are sent LTL freight to a business with an average fee of 5 for shipping/ crating  0 crating fee
and much more.....if interested please contact us and we can discuss your build. Payment is thru ebay checkout via MC Visa or Discover merchant card.   32 years in the MOPAR business building FAST cars......  Thank you!   Driveline Works